aFe 49-34082-P MACH Force-Xp Axle-Back Exhaust System 3in to 2.5in Tubing Incl. Dual Muffler/Hardware/Quad 4in Polished Tips

aFe
aFe 49-34082-P MACH Force-Xp Axle-Back Exhaust System 3in to 2.5in Tubing Incl. Dual Muffler/Hardware/Quad 4in Polished Tips

Please Note: Some images my not represent the actual product

SCW is an Authorized Dealer Free Ground Shipping Over $150 Expert Aftermarket Support, Before & After You Order
Part Number: 49-34082-P
Manufacturer: aFe
On Sale: $2,369.29

Availability:
1 New In Stock
Norton Shopping Guarantee

Product Note:

MACH Force-Xp Axle-Back Exhaust System 3in to 2.5in Tubing Incl. Dual Muffler/Hardware/Quad 4in Polished Tips

Specs:

Clamps Included: Yes
Exhaust Pipe Material: Stainless Steel
Exhaust Type: Dual
Exit Position: Quad Center
Exit Quantity: Quad
Exit Style: Straight
Main Piping Diameter (in.): 3
Material: 304 Stainless Steel
Muffler Count: 2
Pipe Material: 304 Stainless
Sound Level: Aggressive
System Type: Axle Back
Tip Diameter (in.): 4
Tip Finish: Polished
Tip Quantity: 4
Tip Size: 4.0 in.

The aFe Mach Force XP Exhaust System eliminates the use of the restrictive diesel particulate filter (DPF) for maximum performance and extreme mileage gains.This free flowing exhaust system is constructed out of durable 4” mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a clean installation. This system comes complete with all tubing, muffler, bayonet hangers, band clamps, thermocouple and pressure tap bungs and is finished off with a high luster polished 304 stainless steel, rolled, slash cut tip.

You will be shocked at the performance and mileage improvement you will see from this system.This system requires the use of a controller with a DPF-delete function. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Features

  • Bayonet Hangers – Swaged bayonet ends lock exhaust components into place for the most secure installation possible. Other manufacturers use less expensive bent hangers that allow tubes and parts to slide from side to side, causing premature wear and damage.
  • Welded-on Hangers – Every hanger is thoroughly welded on each side to ensure a stronger connection, compared to other manufacturers who use only inferior floating hangers.
  • Band Style Clamps – Premium-quality band clamps are used on critical joints to provide the tightest, leak-free seal possible. Other systems use common, less expensive U-bolt clamps.
  • Mandrel Bent – All aFe tubing is 100% mandrel-bent. Mandrel bending ensures the tubing maintains its shape and size, providing smooth, unrestricted airflow. Standard tubing can lose as much as 20% of its diameter in sharp bends.

Select Vehicle Above to Narrow Fitment Info!

Year Make Model Trim Engine Vehicle Fit Notes

Chevrolet

 

Corvette

 

Z06

 
6.2L V8 Gas OHV Supercharged
 
Chevrolet
Corvette
Z06

6.2L V8 Gas OHV Supercharged
MACH Force-Xp Axle-Back Exhaust System Fits Corvette
Convertible 2-Door
 

Chevrolet

 

Corvette

 

Z06

 
6.2L V8 Gas OHV Supercharged
 
Chevrolet
Corvette
Z06

6.2L V8 Gas OHV Supercharged
MACH Force-Xp Axle-Back Exhaust System Fits Corvette
Coupe 2-Door
 

Chevrolet

 

Corvette

 

Z06

 
6.2L V8 Gas OHV Supercharged
 
Chevrolet
Corvette
Z06

6.2L V8 Gas OHV Supercharged
MACH Force-Xp Axle-Back Exhaust System Fits Corvette
w/Factory Style NPP Valves
Convertible 2-Door
 

Chevrolet

 

Corvette

 

Z06

 
6.2L V8 Gas OHV Supercharged
 
Chevrolet
Corvette
Z06

6.2L V8 Gas OHV Supercharged
MACH Force-Xp Axle-Back Exhaust System Fits Corvette
w/Factory Style NPP Valves
Coupe 2-Door
 

Chevrolet

 

Corvette

 

Z06

 
6.2L V8 Gas OHV Supercharged
 
Chevrolet
Corvette
Z06

6.2L V8 Gas OHV Supercharged
MACH Force-Xp Axle-Back Exhaust System Fits Corvette
w/Factory Style NPP Valves
Targa 2-Door