Rear Diff Member Bushings
The stock bushings on current Subaru models are one of the weakest points of their suspension design. The OEM bushing was designed primarily for comfort and is very soft. It’s known to fail prematurely, especially in areas with poor roads.
The Rear Differential Member bushings removes the squishy feeling you get at the rear of the car, and cures the tendency of the rear end to “crab” as you go down the road.
Lower Control Arm Bushings
These Polyurethane Bushing are a replacement for the soft rubber bushing at the front inside corner of the front Lower Control Arm (LCA). This is an ideal complement to the CAB bushing system, and is very easy to do together with the CAB bushing as the control arm will be off. Comes in 57mm and 61mm width.
Transmission Mount Bushings
Our polyurethane Gearbox Mount Bushings tighten up the feel of your entire drivetrain, reducing movement and the resulting power losses. For all 5 speed and 6 speed manual transmission models.
T-mount polyurethane bushing upgrade. Reduces differential tramp and helps get power to the ground.