Zone Offroad Lift Kits

About Zone Offroad

For over a decade, Zone Offroad has been developing quality lift options for trucks and Jeeps. They offer the best value in the industry. Whether you’re looking for just a small boost or a full lift kit, Zone Offroad has the kits and accessories to set your ride up right.

Zone Offroad Lift Kits

Zone Offroad produces heavy-duty lift kits for Chevrolet, GMC, Ford, RAM, Dodge Toyota, and Jeep trucks. They offer a variety of lift heights. This allows you to optimize your set up to suit your truck’s tire and ground clearance. Zone Offroad lift kits features may include heavy-duty crossmembers, steering knuckles, strut spacers, and rear block kits to level out the stance. Custom-valved shock absorbers are available to improve performance and ride-quality on and off-road. Lastly, all of their suspension systems are made in the USA and powdercoated for a long-lasting appearance!

We will now highlight a few of their available lift kits.

Jeep

You can take your Wrangler JL to new heights with this 3″ lift kit. This 3″ lift kit includes everything needed. It includes full length coil springs and bump stop extensions to longer sway bar links, rear track bar bracket and lower cam washers. You can now get the look, performance, and capability your Jeep deserves with clearance for up to 37″ tires.

Key Features:

  • Front and rear replacement coil springs to lift
  • Front and rear bump stop extension to properly engage bump stops during hard compression
  • Front and rear sway bar links to correct sway bar operating angle
  • Front lower cam washers to correct caster
  • Rear track bar bracket to recenter axle under vehicle

Specs

Front Lift Height3″
Rear Lift Height3″
Front Lift MethodCoil Springs
Rear Lift MethodCoil Springs
Lift TypeLift Kit
Wheel Size17 x 9
Back Spacing4.5″
Max Tire Size35 x 12.5
Wheel Size 217 x 9
Back Spacing 24.5″
Max Tire Size 237 x 12.5
Is AdjustableNo
Metal Cutting RequiredNo
Accommodates Factory WheelsNo
Welding RequiredNo

Important Notes:

  • Does not fit Diesel Models
  • Non-Rubicon comes from factory at lower ride height, will net slightly more lift final stance the same for all models.
  • Stock wheels cannot be reinstalled without spacers due to rear sway bar interference.
  • Will not fit 4xe models.
  • Will not fit Rubicon 392 models.

Ford

Zone Offroad Lift Kits Ford F150
Zone Offroad Lift Kit for Ford F150

This is a 4″ lift kit from Zone Offroad for a Ford F150. This kit includes everything needed from high strength crossmembers and steering knuckles to strut spacers and rear block kit to level out the stance. Acheive the look, performance, and capability with clearance for up to 35″ tires.

Key Features

  • High strength crossmembers to correct lower control arm positioning
  • Ductile iron steering knuckles to correct steering geometry and maintain ESC system compatibility
  • Top mounted strut spacers to provide lift and install easily
  • Differential skid plate for improved offroad protection
  • Rear lift blocks and u-bolts to lift and level the stance
  • Sway bar, brake line and bump stop relocation brackets to correct operating angles

Specs

Front Lift Height4″
Rear Lift Height4″
Front Lift MethodKnuckle & Strut Spacer
Rear Lift MethodCast Blocks
Lift TypeLift Kit
Wheel Size18 x 9
Back Spacing5.5″
Max Tire Size35 x 12.5
Wheel Size 220 x 9
Back Spacing 25.5″
Max Tire Size 235 x 12.5
Wheel Size 322 x 9
Back Spacing 35.5″
Max Tire Size 335 x 12.5
Is AdjustableNo
FinishPowdercoat
Metal Cutting RequiredNo
Accommodates Factory WheelsSee Notes
Welding RequiredNo

Important Notes:

  • 18″ wheels should be test fit to ensure proper tie rod end clearance. Wheel profiles can vary between manufacturers.
  • Depending on wheel selection, minor trimming may be required to fit tire.
  • Models equipped with Auto 4wd may require front driveshaft replacement.
  • Requires frame bracket modification.
  • Some 2015 – 2016 models are equipped with an Auto 4wd feature as indicated by a ‘4A’ option on the transfer case shift selection knob. Those models must use the equivalent 2017-18 model lift system.
  • Stock 17″/18″ wheels cannot be reinstalled. Stock 20″ wheels can be used with up to a 305/60R20 tire.
  • Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.

Dodge

Zone Offroad Lift Kits for Dodge Ram 1500
Zone Offroad Lift Kits for Dodge Ram 1500

This kit will take your RAM 1500 to new heights with this 6″ lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to strut spacers and differential relocation brackets to maintain driveline angles. Get the look, performance, and capability your truck deserves with clearance for up to 37″ tires.

Key Features

  • Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance.
  • Heavy-duty differential skid slate improves offroad protection.
  • High-strength, CNC machined, replacement steering knuckles improve strength while correcting steering angles.
  • Top mount strut and preload spacers set ride height and maintain ride quality.
  • 5″ rear coil springs achieve leveled stance while maintain ride quality and load capacity.

Specs

Front Lift Height6″
Rear Lift Height5″
MaterialSteel
Front Lift MethodKnuckle & Strut Spacer
Rear Lift MethodCoil Springs
Lift TypeLift Kit
Wheel Size20 x 9
Back Spacing4.5-5″
Max Tire Size37 x 12.5
Wheel Size 218 x 9
Back Spacing 24.5-5″
Max Tire Size 237 x 12.5
FinishPowdercoat
Metal Cutting RequiredYes
FMVSS CertificationYes
Accommodates Factory WheelsSee Notes

Important Notes:

  • Will NOT fit 2019 RAM 1500 Classic models, Refer to the 2018 kit listings.
  • Will NOT fit models equipped with the Thermal Axle option. Reference build code DSK-P
  • If installing the 6″ kit on a Rebel or truck with an “off road group package” the truck will sit about 1/2″ front high with the preload spacer installed. If the preload spacer is not installed the truck will sit about 3/8″ nose low. RAMs with factory 22″ wheels require the larger bore knuckles due to larger wheel bearing assembly. Reference build code WPM or WPZ. Stock 17″ wheels cannot be reinstalled due to steering interference. Stock 20s can be reinstalled with factory tire size. This kit will NOT work on Diesel models. Fitment: Does NOT work for models with factory rear airbag suspension

Final Words

Zone Offroad kits have been designed to fit your budget without sacrificing product quality or vehicle performance. You can rest assured that no corners have been cut and offer inferior products, All Zone Offroad products are built from high quality American materials and manufactured right here in the USA for strength, durability and a perfect fit.