The advent of electronic throttle (or drive-by-wire) systems in late model cars presents a unique tuning opportunity. On these cars, the throttle plate is modulated by an electronic signal that is connected to the accelerator pedal. Because this system is based upon voltage readings from a sensor, it can be easily modified with an electronic controller. Controlling the ratio of pedal-to-throttle opening allows the driver to dial in precisely the feeling needed, whether its quick blips of the throttle for heel-toe driving technique or de-sensitizing the pedal for economy mode driving. Now, the driver has this under his control with the Buddy Club e-Throttle Booster.
Utilizing the latest microprocessor technology, the e-Throttle Booster modifies the signal between accelerator pedal, ECU, and throttle body to boost or cut the angle of the throttle plate in relation to its stock settings. The e-Throttle Booster allows for 12-steps of adjustment and 31 levels of total adjustment throughout the range of the throttle position sensor, allowing for precision changes according to driver preference. At low ranges, it reduces the perceived effect of throttle lag “ the amount of time that occurs between when the accelerator is pressed and when the engine responds. At the upper RPM ranges, the increased sensitivity makes it easier to perform racing techniques like the heel-toe shift.Each unit comes with an application specific wiring harness for quick installation.
Since it is adjustable, the driver can change preferences on the fly or leave them set up for track or off-road preference. E-Throttle Booster also utilizes an Economy Mode that allows the driver to de-tune throttle response for the most fuel economy with the least amount of driver effort. This new idea is now being implemented as optional equipment on late model vehicles, and may soon be an available feature on all new electronic throttle cars. The increase in fuel savings will more than pay for the unit itself in a short amount of time. Conversely, dual-purpose vehicles that see highway time in addition to serving weekend warrior duty can now implement an additional level of automatic control and fine-tuning thats never been available before. A quick flick of the knob is all it takes to maximize your throttle effort. Like the short throw shifters that came before them, the e-Throttle Booster incorporates technology and an revised driving experience that will have you hooked once you try it. You may never have to push the pedal to the metal to achieve the wide-open throttle response that you need during spirited driving maneuvers.
Electronic throttle or drive-by-wire throttle systems utilize a sensor incorporated into the vehicles main Engine Control Unit (ECU) to translate your mechanical pedal effort into electronically modulated opening and closing of the throttle plate in the throttle body. From the factory, the ratio of pedal movement to throttle plate opening is governed by the ECU and is meant to provide the most reasonable compromise between pedal sensitivity and throttle plate movement. The e-Throttle Booster acts as a modifier of that signal, allowing you to increase or decrease the ratio at will, fine tuning the pedal actuation experience to the driving task at hand. With its fast microprocessors, the e-Throttle Booster can virtually eliminate the perceived lag between pedal and throttle plate; it also has the capability to modify the total angle opening of the throttle plate in real time, allowing more air (and therefore, more power production ability) into the engine intake tract Because of the method used to intercept and modify the signal, as well as the point in the ECU system where the signal is modified, the e-Throttle Booster will not be detected by the cars OBDII system; therefore, the factory ECU cannot override your settings, nor will the e-Throttle Booster cause Diagnostic Trouble Codes.