CLEVITE CB-1643P Conn Rod Bearing Set

CLEVITE
CLEVITE CB-1643P Conn Rod Bearing Set

Please Note: Some images my not represent the actual product

Part Number: CB-1643P
Manufacturer: CLEVITE
On Sale: $12.43

Availability:
38 New In Stock
Norton Shopping Guarantee
   
SCW is an Authorized Dealer Free Ground Shipping Over $150 Expert Aftermarket Support, Before & After You Order

Product Note:

Conn Rod Bearing Set

Specs:

Material: TM-77

CLEVITE BEARINGS ARE SOLD AS PAIRED SETS (TWO BEARINGS, FOR ONE ROD) UNLESS OTHERWISE NOTED. FOR A 6 CYLINDER, YOU SHOULD ORDER QUANTITY: 6

Clevite rod bearings come in a wide assortment of styles for a huge range of vehicles, from mild to wild. Theyre made to meet or exceed OEM standards for strength and durability, and will help give your engine extra life. Their quality construction and superior materials protect vital parts from the harmful effects of friction. Plus, there are thousands of applications, with subtle differences that cover numerous variations and usages. So youre sure to find the bearings you need for your engine.

P-Series Bearings
These are not to be confused with the standard passenger car and light truck parts for the same retention applications which also have a P suffix letter. These high performance parts have unique core part numbers different from the standard parts for the same application. P-Series parts are the oldest series of Clevite high performance bearings. The rod bearings in this series typically have the greatest amount of eccentricity. Most rod bearings are available either with or without dowel holes for use in aluminum rods. Most P-Series main sets are full grooved to maximize oil flow to the rod bearings. Both rods and mains have high crush for maximum retention, and a reduced overlay thickness to prevent overlay fatigue, sometimes referred to as hen tracking.

Rod bearings use a hardened steel back for added strength and resistance to fretting. Extra clearance rod bearings are available for .001 additional clearance and select fitting. Use the P-Series rods where extremely high RPMs cause severe rod bore close-in. This is typically indicated by nearly full parting line to parting line shaft contact with bearings having less eccentricity. Use P-Series mains where higher eccentricity is desired to narrow bearing contact patterns and to provide increased oiling to rod earings. Rod bearing oil starvation is typically indicated by polishing and smearing of the bearing surface, possibly accompanied by discoloration predominantly concentrated at the axial center of the bearings.

H-Series Bearings
These bearings are identified by a letter H in the part number suffix. Part numbering is based on the same core number as the standard passenger car parts for the same application. These bearings were developed primarily for use in NASCAR type racing, but are suitable for all types of competition engines.

H-Series bearings have a medium level of eccentricity, high crush, and rod bearings have a hardened steel back and thin overlay. These bearings also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 extra clearance are available for standard size shafts and carry the suffix HX (X = extra clearance). Rod bearings are available with or without dowel holes (HD = with, H = without), main bearings are available with standard 180 degrees upper half grooving and with full 360 degrees grooving (H = 180 degrees, HG 360 degrees). Use H-Series bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range. H-Series bearings should be used if contact patterns obtained with P-Series parts are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface. See accompanying contact pattern diagrams. If you arent sure which type of performance bearing to start with, the H-Series bearing will be your best choice.

K-Series Bearings
These bearings are identified by a letter K in the part number suffix. Part numbering is based on the same core number as the high performance part and will service the same application. These bearings were developed primarily for high performance applications and all types of competition engines. K-Series bearings have a proprietary moly/graphite treatment applied to the bearings surface, but not the bearing parting lines. The PTFE carrier material gives good low load start-up protection. The moly serves as a high pressure, high load dry film anti-wear agent. Graphite provides additional protection across the broad range of temperatures, especially when oil flow is marginal and is especially slippery with an oil film. These bearings, which are also referred to as TriArmor, still offer the strength and durability of the legendary Clevite TriMetal bearing construction coupled with the latest in coating technology.

V-Series Bearings
These parts essentially duplicate the former Vandervell parts under the Clevite part numbering system. (Same core part no. as standard passenger car parts but with a suffix letter V).

V-Series rod bearings typically have low to medium eccentricity and a hardened steel back. All V-Series main sets use a single piece thrust bearing rather than the former Vandervell assembled type of construction. V-Series parts are not available with oversize chamfers. Extra clearance parts are available with a suffix VX (.001 extra clearance), and VXX (.002 extra clearance) for some applications. V-Series bearings do not have flash plating on the steel back. Narrowed parts are available with a VN suffix for some applications. These are made to accommodate increased crankshaft fillet clearance.

The chief difference between the V-Series and other Clevite TriMetal bearings is the use of lead-indium overlay. Use V-Series bearings if prior experience has shown a preference for the lead-indium type of overlay. Lead indium overlay offers somewhat better conformability than leadtin-copper overlay with slightly reduced wear resistance.

M-Series Bearings
Clevite Micro bearings make up the M-Series. These are special purpose bearings having a nominal .006 thick babbitt lining on a hardened steel back. M-Series rod bearings have been slightly narrowed at one end to provide extra fillet clearance without the need of a large chamfer. The lower rod shells have a dowel hole for use in aluminum rods with dowel pins. M-Series mains have enlarged chamfers and, for certain applications, oil holes and oil grooves have also been enlarged.

Use M-Series parts to take advantage of the high degree of conformability offered by the babbitt lining. These parts are intended mainly for engines where severe crankshaft deflections cause edge loading of the bearings. Under these operating conditions bearing service life will be very short.

Frequent inspections are recommended and bearings should be replaced at the first signs of distress.

CLEVITE BEARINGS ARE SOLD AS PAIRED SETS (TWO BEARINGS, FOR ONE ROD) UNLESS OTHERWISE NOTED.FOR A 6 CYLINDER, YOU SHOULD ORDER QUANTITY: 6

Select Vehicle Above to Narrow Fitment Info!

Year Make Model Trim Engine Vehicle Fit Notes

Chrysler

 

Sebring

 

ALL

 
2.4L L4
 
Chrysler
Sebring
ALL

2.4L L4
 

Dodge

 

Ram 50

 

ALL

 
2.4L L4
 
Dodge
Ram 50
ALL

2.4L L4
From 4/92 Production Date
 

Dodge

 

Stratus

 

ALL

 
2.4L L4
 
Dodge
Stratus
ALL

2.4L L4
 

Eagle

 

Summit

 

ALL

 
2.4L
 
Eagle
Summit
ALL

2.4L
From 4/92 Production Date
 

Eagle

 

Talon

 

ALL

 
2.0L
 
Eagle
Talon
ALL

2.0L
From 4/92 Production Date
 

Hyundai

 

Sonata

 

ALL

 
2.0L L4
 
Hyundai
Sonata
ALL

2.0L L4
From 4/92 Production Date
 

Hyundai

 

Tiburon

 

ALL

 
ALL
 
Hyundai
Tiburon
ALL

ALL
 

Mitsubishi

 

Eclipse

 

ALL

 
2.0L L4,
2.4L L4
 
Mitsubishi
Eclipse
ALL

2.0L L4,
2.4L L4
From 4/92 Production Date
 

Mitsubishi

 

Expo

 

ALL

 
ALL
 
Mitsubishi
Expo
ALL

ALL
From 4/92 Production Date
 

Mitsubishi

 

Expo LRV

 

ALL

 
2.4L
 
Mitsubishi
Expo LRV
ALL

2.4L
 

Mitsubishi

 

Galant

 

ALL

 
2.4L L4
 
Mitsubishi
Galant
ALL

2.4L L4
From 4/92 Production Date
 

Mitsubishi

 

Mighty Max

 

ALL

 
2.4L L4
 
Mitsubishi
Mighty Max
ALL

2.4L L4
From 4/92 Production Date
 

Mitsubishi

 

Montero Sport

 

ALL

 
2.4L L4
 
Mitsubishi
Montero Sport
ALL

2.4L L4
 

Mitsubishi

 

Outlander

 

ALL

 
ALL
 
Mitsubishi
Outlander
ALL

ALL
 

Mitsubishi

 

Van

 

ALL

 
ALL
 
Mitsubishi
Van
ALL

ALL
 

Plymouth

 

Colt

 

ALL

 
2.4L
 
Plymouth
Colt
ALL

2.4L
From 4/92 Production Date
 

Plymouth

 

Laser

 

ALL

 
2.0L
 
Plymouth
Laser
ALL

2.0L
From 4/92 Production Date