EXEDY HMG12SD Hyper Twin Organic Clutch Strap Drive Type Sprung Center Disc Pull Type Cover For use w/ Hyper Accessory Kit HC

EXEDY
EXEDY HMG12SD Hyper Twin Organic Clutch Strap Drive Type Sprung Center Disc Pull Type Cover For use w/ Hyper Accessory Kit HC

Please Note: Some images my not represent the actual product

Part Number: HMG12SD
Manufacturer: EXEDY
On Sale: $1,820.76

Availability:
20 New In Stock
Norton Shopping Guarantee
   
SCW is an Authorized Dealer Free Ground Shipping Over $150 Expert Aftermarket Support, Before & After You Order

Product Note:

Hyper Twin Organic Clutch Strap Drive Type Sprung Center Disc Pull Type Cover For use w/ Hyper Accessory Kit HCAK102

Specs:

Clamp Load: 1765
Disc Diameter (Inches): 7.9
Disc Diameter (Millimeters): 200
Kit Contents: TBA
Spline Count: 24
Spline Size (Inches): 1
Spline Size (Millimeters): 26
Torque Capacity (ft/lbs.): 340

For high-powered applications, EXEDY offers twin and triple Multi-Plate clutches. These are designed for high power street action as well as drag, road and rally racing. The twin plate clutches are rated for approximately 500 ft/lbs of torque and the triple plates are rated for approximately 800 ft/lbs of torque, both figures at the flywheel. Twins come with both spring damper discs or solid discs depending on application, whereas triples are all solid discs and not recommended for street use.

All EXEDY Hyper Multi-Plate clutches come with a lightweight, chromoly steel flywheel and the famous purple anodized forged aluminum clutch cover. Depending on the application, we have both strap drive and lug drive models. All have T5001 cerametallic friction materials for extreme heat resistance. Surprisingly, even with its additional power capability, most multi-plate clutches exhibit light pedal pressure thanks to a half-engaged zone provided by the patented clutch cushion function.

SD/HD Type
This model has been developed for high powered street cars and race cars with up to approximately 600TQ @ FW. They feature ventilated, thick intermediate plates for improved life and spring damper discs to protect your transmission and drive line. HD kits have slightly high clamp load than their SD counterparts and have approximately 20% higher power capacity.

SDF Type
This model has been developed for high performance street cars with up to approximately 550TQ @ FW. They feature full faced organic friction discs for improved drivability while maintaining excellent power holding capability.

SR Type
These clutch covers are designed to achieve a clamping load that is approx. 40% higher than the genuine part allowing a higher torque transmitting capacity. Ductile material is used for all pressure plates and, high burst strength can be achieved in all temperature ranges.

HR Type
This model has three plates and is developed specifically for high power applications such as over 800 ft/lbs of torque at the flywheel for drag racing. It handles high torque loads and shifts smooth, and because of the lightweight clutch discs, you can reduce your shift times.

All EXEDY Racing Hyper Multi Series Clutch Kits carry SFI 1.2/1.5 Certification. Which means, when you buy these products, you can be confident they are certified for use in competitive motorsports.

PLEASE NOTE: All referenced torque ratings are measured at the wheels.

Select Vehicle Above to Narrow Fitment Info!

Year Make Model Trim Engine Vehicle Fit Notes

Acura

 

NSX

 

ALL

 
3.2L V6 C32B1
 
Acura
NSX
ALL

3.2L V6 C32B1
Transmission Input Shaft Must be Changed to 91-96 Model
 

Acura

 

NSX

 

ALL

 
3.0L V6 C30A1
 
Acura
NSX
ALL

3.0L V6 C30A1