H&R 4035633 TRAK+ Wheel Spacer DRM Style Sold as Pair

H&R
H&R 4035633 TRAK+ Wheel Spacer DRM Style Sold as Pair

Please Note: Some images my not represent the actual product

H&R 4035633 TRAK+ Wheel Spacer DRM Style Sold as Pair_1
H&R 4035633 TRAK+ Wheel Spacer DRM Style Sold as Pair_2
SCW is an Authorized Dealer Free Ground Shipping Over $150 Expert Aftermarket Support, Before & After You Order
Part Number: 4035633
Manufacturer: H&R
On Sale: $132.36

Availability:
8 New In Stock
Norton Shopping Guarantee

Product Note:

TRAK+ Wheel Spacer DRM Style Sold as Pair

Specs:

Bolt Pattern: 5/108
Bolt/Stud: Stud
Center Bore: 63.3
Thread Type: 12x1.5
Width: 20mm

Lug Nuts / Bolts
H&R offers a large selection of specialty wheel tightening bolts and lug nuts, available with a multitude of thread sizes and seat types. Lug nuts and bolts may be used as replacement parts or with other H&R products. And, it’s always a good idea to have a couple extras on hand.

WHEN ORDERING WHEEL BOLTS, PLEASE FOLLOW THESE GUIDELINES
a) If possible, name the brand of wheel.

b) New bolts must be longer than the original bolts by the width of the wheel spacer used.

c) The bolt head must be identical to the existing bolt:

  • Taper 60deg – End digit 01
  • Round head for M12/d24 mm, for M14/d28 mm– End digit 02
  • Round head for M12/d26 mm (e.g. OE VAG-wheels)– End digit 03
  • Flat head for Porsche original wheels M14 × 1.5 – End digit 06

d) Safety guidelines
(Minimum number of turns for wheel bolts / nuts):

  • M12 × 1.25=8.0 turns=approx. 10 mm of load bearing shaft length
  • M12 × 1.50=6.5 turns=approx. 10 mm of load bearing shaft length
  • M12 × 1.75=6.5 turns=approx. 12 mm of load bearing shaft length
  • M14 × 1.25= 9.0 turns = approx. 12mm of load bearing shaft length
  • M14 × 1.50=7.5 turns=approx. 12 mm of load bearing shaft length
  • 1/2” UNF= 8.0 turns = approx. 11 mm of load bearing shaft length

Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm — i.e. Rear Axle Mercedes).

Select Vehicle Above to Narrow Fitment Info!

Year Make Model Trim Engine Vehicle Fit Notes

Ford

 

Focus

 

ALL

 
ALL
 
Ford
Focus
ALL

ALL
Submodel: RS
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.
 

Ford

 

Focus

 

ALL

 
ALL
 
Ford
Focus
ALL

ALL
Submodel: S
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.
 

Ford

 

Focus

 

ALL

 
ALL
 
Ford
Focus
ALL

ALL
Submodel: ST
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.
 

Ford

 

Fusion

 

ALL

 
ALL
 
Ford
Fusion
ALL

ALL
Submodel: S
FWD
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.
 

Jaguar

 

S-Type

 

ALL

 
Supercharged
 
Jaguar
S-Type
ALL

Supercharged
Submodel: R
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.
 

Jaguar

 

S-Type

 

ALL

 
ALL
 
Jaguar
S-Type
ALL

ALL
Submodel: BASE
2WD
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.
 

Jaguar

 

X-Type

 

ALL

 
ALL
 
Jaguar
X-Type
ALL

ALL
AWD
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.
 

Jaguar

 

XF

 

ALL

 
ALL
 
Jaguar
XF
ALL

ALL
Submodel: PREMIUM
2WD
AWD
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Jaguar

 

XF

 

ALL

 
ALL
 
Jaguar
XF
ALL

ALL
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.
 

Jaguar

 

XK

 

ALL

 
ALL
 
Jaguar
XK
ALL

ALL
Cabrio
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.
 

Jaguar

 

XKR

 

ALL

 
ALL
 
Jaguar
XKR
ALL

ALL
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.
 

Lincoln

 

MKZ

 

ALL

 
ALL
 
Lincoln
MKZ
ALL

ALL
Submodel: PREMIERE
FWD
AWD
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.