Product Note:
TRAK+ Wheel Spacer DRM Style Sold as Pair
Specs:
Bolt Pattern |
5/108 |
Bolt/Stud |
Stud |
Center Bore |
63.3 |
Thread Type |
12x1.5 |
Width |
20mm |
Lug Nuts / Bolts
H&R offers a large selection of specialty wheel tightening bolts and lug nuts, available with a multitude of thread sizes and seat types. Lug nuts and bolts may be used as replacement parts or with other H&R products. And, it’s always a good idea to have a couple extras on hand.
WHEN ORDERING WHEEL BOLTS, PLEASE FOLLOW THESE GUIDELINES
a) If possible, name the brand of wheel.
b) New bolts must be longer than the original bolts by the width of the wheel spacer used.
c) The bolt head must be identical to the existing bolt:
- Taper 60deg – End digit 01
- Round head for M12/d24 mm, for M14/d28 mm – End digit 02
- Round head for M12/d26 mm (e.g. OE VAG-wheels) – End digit 03
- Flat head for Porsche original wheels M14 × 1.5 – End digit 06
d) Safety guidelines
(Minimum number of turns for wheel bolts / nuts):
- M12 × 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
- M12 × 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
- M12 × 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length
- M14 × 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length
- M14 × 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
- 1/2” UNF = 8.0 turns = approx. 11 mm of load bearing shaft length
Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm — i.e. Rear Axle Mercedes).
H&R 4035633 Trak+(TM) Wheel Spacers (two) Spacers
H&R Trak+(TM) Wheel Spacers move your wheels out so they are flush with the fender-instantly giving your vehicle the perfect stance. Whether you want improved handling, increased safety, or simply want your car to make a statement about your individual style, Trak+(TM) Wheel Spacers can help you accomplish your goal and GO WIDE(TM). Manufactured from a special proprietary alloy that has a higher tensile strength than 6"6"-T6"billet aluminum, H&R Trak+(TM) Wheel Spacers are hubcentric featuring a full contact hub-just like the factory hub-for even load force distribution and lateral support.
H&R Springs Trak+(TM) Wheel Spacers (two)
Still looking for other Aftermarket Performance Parts? Browse our full catalog of Top Aftermarkert Cart Parts & Accessories Brands and Manufacturers here.