H&R 40556654SW TRAK+ Wheel Spacer DRA Style Sold as Pair

H&R
H&R 40556654SW TRAK+ Wheel Spacer DRA Style Sold as Pair

Please Note: Some images my not represent the actual product

H&R 40556654SW TRAK+ Wheel Spacer DRA Style Sold as Pair_1
H&R 40556654SW TRAK+ Wheel Spacer DRA Style Sold as Pair_2
SCW is an Authorized Dealer Free Ground Shipping Over $150 Expert Aftermarket Support, Before & After You Order
Part Number: 40556654SW
Manufacturer: H&R
On Sale: $124.30

Availability:
6 New In Stock
Norton Shopping Guarantee

Product Note:

TRAK+ Wheel Spacer DRA Style Sold as Pair

Specs:

Bolt Pattern: 5/112
Bolt/Stud: Bolt
Center Bore: 66.5
Color: Black
Thread Type: 14x1.5
Width: 20mm

TRAK+ Spacers
If you’ve ever seen a sleek, European sedan with that oh-so-low street stance and a bulging wheel / tire combo that fits perfectly in the wheel wells, chances are that car was fitted with H&R TRAK+ Wheel Spacers. TRAK+ Wheel Spacers make your existing tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increased safety or simply desire your car to make a statement about your individual style, TRAK+ Wheel Spacers can help you accomplish your goal.

TRAK+ Adapters
Adapt wheels with a different bolt pattern. Available in thicknesses ranging from 20mm to 25mm, H&R TRAK+ Wheel Adapters change a vehicle’s bolt pattern so that wheels from a different vehicle make or model may be fitted.

Similar to H&R TRAK+ DRM Series Wheel Spacers, H&R’s TRAK+ Wheel Adapters are hubcentric spacers and fit to the vehicle hub just as a normal TRAK+ Wheel Spacer would. Once fitted however, H&R TRAK+ Wheel Adapters feature a different bolt pattern on the wheel side of the spacer allowing for non-standard bolt pattern wheel fitment.

Variations

  • DR Series (10 – 40 mm track widening)
    DR Series spacers fit between the wheel and hub, and require longer wheel bolts (ordered separately). Please verify bolt specifics before ordering (taper or round bolt head and shaft length).All DR-Systems require longer wheel bolts. These must be ordered separately.
  • DRS Series (10 – 40 mm track widening)
    DRS Series spacers fit between the wheel and hub, and require exchanging the existing wheel studs for longer ones (included).
  • DRA Series (40 – 60 mm track widening)
    DRA Series spacers bolt to the hub with special wheel bolts (included) and provide new threaded holes for wheel bolts.
  • DRM Series (40 – 90 mm track widening)
    DRM Series spacers bolt to the hub with existing wheel studs and special nuts (included). Wheel is bolted to new DRM wheel studs.

Features

  • Hubcentric
  • Maximizes vehicle track width for great looks, lowered roll center, and increased lateral stability – improved handling
  • Made of a proprietary aluminum/magnesium alloy (Up to 70% lighterthan a comparable steel product)
  • Hard anodized to ensure a tough, durable finish
  • Great for use in winter with snow tires and wheels

WHEN ORDERING WHEEL BOLTS, PLEASE FOLLOW THESE GUIDELINES
a) If possible, name the brand of wheel.

b) New bolts must be longer than the original bolts by the width of the wheel spacer used.

c) The bolt head must be identical to the existing bolt:

  • Taper 60deg – End digit 01
  • Round head for M12/d24 mm, for M14/d28 mm– End digit 02
  • Round head for M12/d26 mm (e.g. OE VAG-wheels)– End digit 03
  • Flat head for Porsche original wheels M14 × 1.5 – End digit 06

d) Safety guidelines
(Minimum number of turns for wheel bolts / nuts):

  • M12 × 1.25=8.0 turns=approx. 10 mm of load bearing shaft length
  • M12 × 1.50=6.5 turns=approx. 10 mm of load bearing shaft length
  • M12 × 1.75=6.5 turns=approx. 12 mm of load bearing shaft length
  • M14 × 1.25= 9.0 turns = approx. 12mm of load bearing shaft length
  • M14 × 1.50=7.5 turns=approx. 12 mm of load bearing shaft length
  • 1/2” UNF= 8.0 turns = approx. 11 mm of load bearing shaft length

Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm — i.e. Rear Axle Mercedes).

Select Vehicle Above to Narrow Fitment Info!

Year Make Model Trim Engine Vehicle Fit Notes

Audi

 

A4

 

ALL

 
ALL
 
Audi
A4
ALL

ALL
Sedan
 

Audi

 

A4

 

ALL

 
ALL
 
Audi
A4
ALL

ALL
Submodel: BASE
 

Audi

 

A4 allroad

 

ALL

 
ALL
 
Audi
A4 allroad
ALL

ALL
All DR-Systems require longer wheel bolts. These must be ordered separately
 

Audi

 

A4 Quattro

 

ALL

 
ALL
 
Audi
A4 Quattro
ALL

ALL
Sedan
 

Audi

 

A4 Quattro

 

ALL

 
ALL
 
Audi
A4 Quattro
ALL

ALL
Avant
 

Audi

 

A5

 

ALL

 
ALL
 
Audi
A5
ALL

ALL
 

Audi

 

A5 Quattro

 

ALL

 
ALL
 
Audi
A5 Quattro
ALL

ALL
Submodel: CABRIOLET
Cabrio
 

Audi

 

A5 Quattro

 

ALL

 
ALL
 
Audi
A5 Quattro
ALL

ALL
Submodel: BASE
Coupe
 

Audi

 

A5 Sportback

 

ALL

 
ALL
 
Audi
A5 Sportback
ALL

ALL
 

Audi

 

allroad

 

ALL

 
ALL
 
Audi
allroad
ALL

ALL
 

Audi

 

Q5

 

ALL

 
ALL
 
Audi
Q5
ALL

ALL
Submodel: HYBRID PRESTIGE
 

Audi

 

S4

 

ALL

 
ALL
 
Audi
S4
ALL

ALL
 

Audi

 

S4

 

ALL

 
ALL
 
Audi
S4
ALL

ALL
 

Audi

 

S5

 

ALL

 
ALL
 
Audi
S5
ALL

ALL
Submodel: CABRIOLET
Cabrio
 

Audi

 

S5

 

ALL

 
ALL
 
Audi
S5
ALL

ALL
Submodel: BASE
Coupe
 

Audi

 

S5 Sportback

 

ALL

 
ALL
 
Audi
S5 Sportback
ALL

ALL
 

Mercedes-Benz

 

C250

 

ALL

 
ALL
 
Mercedes-Benz
C250
ALL

ALL
Coupe
 

Mercedes-Benz

 

C300

 

ALL

 
ALL
 
Mercedes-Benz
C300
ALL

ALL
Coupe
Cabrio
 

Mercedes-Benz

 

C300

 

ALL

 
ALL
 
Mercedes-Benz
C300
ALL

ALL
Submodel: 4MATIC LUXURY
Coupe
Sedan
 

Mercedes-Benz

 

C300

 

ALL

 
ALL
 
Mercedes-Benz
C300
ALL

ALL
Submodel: LUXURY
Sedan
 

Mercedes-Benz

 

C350

 

ALL

 
ALL
 
Mercedes-Benz
C350
ALL

ALL
Submodel: BASE
Coupe
 

Mercedes-Benz

 

C350

 

ALL

 
ALL
 
Mercedes-Benz
C350
ALL

ALL
Submodel: 4MATIC
Coupe
Sedan
 

Mercedes-Benz

 

C43 AMG

 

ALL

 
ALL
 
Mercedes-Benz
C43 AMG
ALL

ALL
Coupe
Sedan
 

Mercedes-Benz

 

C450 AMG

 

ALL

 
ALL
 
Mercedes-Benz
C450 AMG
ALL

ALL
 

Mercedes-Benz

 

C63 AMG

 

ALL

 
ALL
 
Mercedes-Benz
C63 AMG
ALL

ALL
Coupe
Sedan
 

Mercedes-Benz

 

C63 AMG

 

ALL

 
ALL
 
Mercedes-Benz
C63 AMG
ALL

ALL
Coupe
 

Mercedes-Benz

 

C63 AMG

 

ALL

 
ALL
 
Mercedes-Benz
C63 AMG
ALL

ALL
Sedan
 

Mercedes-Benz

 

C63 AMG S

 

ALL

 
ALL
 
Mercedes-Benz
C63 AMG S
ALL

ALL
Coupe
Sedan
 

Mercedes-Benz

 

CLA250

 

ALL

 
ALL
 
Mercedes-Benz
CLA250
ALL

ALL
Coupe
 

Mercedes-Benz

 

CLA45 AMG

 

ALL

 
ALL
 
Mercedes-Benz
CLA45 AMG
ALL

ALL
 

Mercedes-Benz

 

CLS500

 

ALL

 
ALL
 
Mercedes-Benz
CLS500
ALL

ALL
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

CLS550

 

ALL

 
ALL
 
Mercedes-Benz
CLS550
ALL

ALL
Rear Only
 

Mercedes-Benz

 

CLS550

 

ALL

 
ALL
 
Mercedes-Benz
CLS550
ALL

ALL
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

CLS63 AMG

 

ALL

 
ALL
 
Mercedes-Benz
CLS63 AMG
ALL

ALL
Rear Only
 

Mercedes-Benz

 

CLS63 AMG

 

ALL

 
ALL
 
Mercedes-Benz
CLS63 AMG
ALL

ALL
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

CLS63 AMG S

 

ALL

 
ALL
 
Mercedes-Benz
CLS63 AMG S
ALL

ALL
Sedan
 

Mercedes-Benz

 

CLS63 AMG S

 

ALL

 
ALL
 
Mercedes-Benz
CLS63 AMG S
ALL

ALL
Rear Only
 

Mercedes-Benz

 

E320

 

ALL

 
Turbo DIESEL
 
Mercedes-Benz
E320
ALL

Turbo DIESEL
Wagon
AWD
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

E320

 

ALL

 
GAS,
ALL
 
Mercedes-Benz
E320
ALL

GAS,
ALL
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

E320

 

ALL

 
DIESEL
 
Mercedes-Benz
E320
ALL

DIESEL
Submodel: CDI
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

E350

 

ALL

 
ALL
 
Mercedes-Benz
E350
ALL

ALL
Cabriolet
 

Mercedes-Benz

 

E350

 

ALL

 
ALL
 
Mercedes-Benz
E350
ALL

ALL
Sedan
 

Mercedes-Benz

 

E350

 

ALL

 
ALL
 
Mercedes-Benz
E350
ALL

ALL
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

E400

 

ALL

 
ALL
 
Mercedes-Benz
E400
ALL

ALL
Cabrio
Coupe
 

Mercedes-Benz

 

E500

 

ALL

 
ALL
 
Mercedes-Benz
E500
ALL

ALL
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

E550

 

ALL

 
ALL
 
Mercedes-Benz
E550
ALL

ALL
Coupe
 

Mercedes-Benz

 

E63 AMG

 

ALL

 
ALL
 
Mercedes-Benz
E63 AMG
ALL

ALL
 

Mercedes-Benz

 

E63 AMG

 

ALL

 
ALL
 
Mercedes-Benz
E63 AMG
ALL

ALL
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

S500

 

ALL

 
ALL
 
Mercedes-Benz
S500
ALL

ALL
 

Mercedes-Benz

 

S600

 

ALL

 
ALL
 
Mercedes-Benz
S600
ALL

ALL
 

Mercedes-Benz

 

SL500

 

ALL

 
ALL
 
Mercedes-Benz
SL500
ALL

ALL
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

SL55 AMG

 

ALL

 
ALL
 
Mercedes-Benz
SL55 AMG
ALL

ALL
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

SL550

 

ALL

 
ALL
 
Mercedes-Benz
SL550
ALL

ALL
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

SL600

 

ALL

 
ALL
 
Mercedes-Benz
SL600
ALL

ALL
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

SL63 AMG

 

ALL

 
ALL
 
Mercedes-Benz
SL63 AMG
ALL

ALL
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

SL65 AMG

 

ALL

 
ALL
 
Mercedes-Benz
SL65 AMG
ALL

ALL
Rear Only
If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel
If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer
 

Mercedes-Benz

 

SLC300

 

ALL

 
ALL
 
Mercedes-Benz
SLC300
ALL

ALL
 

Mercedes-Benz

 

SLK250

 

ALL

 
ALL
 
Mercedes-Benz
SLK250
ALL

ALL
Rear Only
 

Mercedes-Benz

 

SLK300

 

ALL

 
ALL
 
Mercedes-Benz
SLK300
ALL

ALL
Rear Only
 

Mercedes-Benz

 

SLK350

 

ALL

 
ALL
 
Mercedes-Benz
SLK350
ALL

ALL
 

Porsche

 

Macan

 

ALL

 
ALL
 
Porsche
Macan
ALL

ALL
Submodel: BASE