HALTECH

Please Note: Some images might not represent the actual product

HALTECH HT-151264 Elite 2000 Terminated Harness ECU Kit

Part Number: HT-151264
Manufacturer: HALTECH
Description : Elite 2000 Terminated Harness ECU KitThe Elite 2000 ECU is positioned between Elite 750 and Elite 25

More...

Authorized Dealer Free Shipping Great Customer Service

Sale Price: $2,247.60

  • Estimated Ship Date: Not enough stock
Free Delievery Free Ground Shipping
0 New In Stock

Description

Product Note:

Elite 2000 Terminated Harness ECU Kit

The Elite 2000 ECU is positioned between Elite 750 and Elite 2500 and is aimed at tuners who want more features than the Elite 750 but don’t need all the race functions available in the Elite 2500. The Elite 2000 takes advantage of the ESP software and offers great value for money.

Featuring intake cam control, short term and long term map learning, dual channel knock control, and much more, the Elite 2000 ECU provides engine calibrators the tools they need to get the job done right.

Alongside the Elite 2000 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.

OVERVIEW:

  • Supports 1 – 12 cylinder or 2 – 4 rotor engines
  • Normally aspirated or forced induction
  • Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
  • Staged, Sequential, semi sequential, batch or multipoint injection patterns
  • Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
  • Connect to a wide range of display dashes and expansion devices via CAN.
  • 8 x Fuel Injection Outputs
  • 8 x Ignition Outputs
  • 10 x Digital Outputs
  • 10 x Analogue Voltage Inputs
  • 4 x Synchronised Pulsed Inputs
  • 4 x Dedicated Inputs (dual knock, ignition switch and onboard MAP Sensor )
  • 2 x Dedicated Engine Position Inputs with extensive trigger type support
  • Up to 45 channels of Input & Output (I/O) expansion (via CAN)
  • USB Laptop communication (Windows)
  • ESP Calibration Software – Intuitive and easy to use

FEATURES:

  • Low impedance injector control with programmable injector peak and hold currents and programmable peak time
  • Flex Fuel Function (direct sensor input) – Tune your engine’s boost, fuel and ignition by ethanol content
  • Flexible tuning setup for Petrol (Gasoline), LPG, Methanol and Ethanol allows you to simply select your fuel type
  • Closed Loop 02 Control – Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit)
  • Dual Channel Knock Control – Synchronised to engine position with high speed digital filtering for accurate detection
  • Variable cam control – Independently control up to 2 intake camshafts (requires a minimum of 1 user defined input & output per variable cam)
  • Closed Loop Idle Speed Control with learning for consistent idle stability (requires 1 or 2 user defined outputs (BAC type) or ​4 user defined outputs (stepper motor type)
  • Long term learning (auto tune) on fuel, cam, boost and idle control maps (up to 3D)
  • On-board data logging – Up to 20 channels of logging at sample rates up to 50ms (20Hz) with 1MB of internal memory
  • Laptop data logging –Data log all available channels directly to your laptop’s hard drive for both tuning and diagnostics
  • Dual CAN Bus communication for Haltech Dashes and expansion devices & OBDII (view live engine data and set and clear diagnostic trouble codes)
  • Injection Stages 1 – 4 with individual injector flow rates per injector
  • 8 Injector drivers for 2 sequential stages on 4 cylinder / 3 rotor engines and up to 4 sequential stages on 2 rotor engines
  • Anti-Lag/Rotational idle – for closed course racing, rally, circuit or drift. Build and maintain boost during closed throttle conditions
  • Rolling Anti-Lag – lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting
  • Launch Control – Control your engine’s power delivery, RPM & boost for consistent performance at the start line

ADVANCED TUNING AND FUNCTIONS:

  • Tuning Table Resolution up to 32 × 32
  • Per Cylinder Tuning Correction – 3D
  • Wideband O2 – Connect up to 8 channels via CAN expansion devices
  • Thermocouples/EGT (Exhaust Gas Temperature) – Connect up to 12 Channels via external CAN expansion devices
  • Engine Protection – Set advanced limits for sensors and protect your engine against common causes of failure
  • Nitrous control with advanced programming for wet or dry nitrous kits with on/off delay and progressive control option. 3D fuel and ignition corrections
  • Boost Control –Intelligent 3D Closed loop learning, with flexible user definable axis and 6 fully user definable corrections Multiple modes – example boost by gear, road speed, etc.
  • Flat shift – Optimise your shifting precision via inputs such as a clutch switch or strain gauge gear knob
  • Timer Function – Used for programmable time based control of multiple engine parameters, power delivery and other user definable functions
  • Traction Control – Control your engine’s power output via mappable front vs rear axle or individual wheel speed slip.

Still looking for other Aftermarket Performance Parts? Browse our full catalog of Top Aftermarkert Cart Parts & Accessories Brands and Manufacturers here.

Unfortunately fitment information for HALTECH HT-151264 is unavailable at this time or is a Universal item!

However, this still might fit your vehicle as we are constantly updating our catalog. Please check with HALTECH the manufacturer to confirm with part number HT-151264 will fit your vehicle.

Otherwise, please feel free to contact us to find the right part for your vehicle.