HKS 80230-AT011 HIPERMAX MAX IV GT Coilovers, Rear Separate Type

HKS
HKS 80230-AT011 HIPERMAX MAX IV GT Coilovers, Rear Separate Type

Please Note: Some images my not represent the actual product

HKS 80230-AT011 HIPERMAX MAX IV GT Coilovers, Rear Separate Type_1
HKS 80230-AT011 HIPERMAX MAX IV GT Coilovers, Rear Separate Type_2
SCW is an Authorized Dealer Free Ground Shipping Over $150 Expert Aftermarket Support, Before & After You Order
Part Number: 80230-AT011
Manufacturer: HKS
On Sale: $1,927.71

Availability:
0 New In Stock
Norton Shopping Guarantee

Product Note:

HIPERMAX MAX IV GT Coilovers, Rear Separate Type

Specs:

Damping Force (Front): 1200m/sec (Rebound) & 350m/sec (Compression)
Damping Force (Rear): 750m/sec (Rebound) & 250m/sec (Compression)
Front Upper Mount: Rubber
Lowering (Front): -26mm (From 0 to -72mm)
Lowering (Rear): -25mm (From 0 to -61mm)
Rear Upper Mount: Rubber
Spring Length (Front): 250mm
Spring Length (Rear): 250mm
Spring Rate (Front): 78N/mm (8kgf/mm)
Spring Rate (Rear): 88N/mm (9kgf/mm)

The new Max IV sporty suspension. Awesome sporty drive with great control and comfortable ride in the street.

It’s perfect for daily street drive with style and performance. You and your passenger can have a comfortable ride even with a low-down.

Single Tube Damper Design
Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and centre of gravity gives a more stable ride.

Dust Boot
Protect the shaft from the flying stones.

PNE Coating
Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.

“M Shaft”
With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range because of the optimized oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.

New Design Needle
Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.

Reduction of Unsprung Weight
In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)

30 Step Damping Force Adjustment
30 levels of dampening adjustment allow fine tune adjustment for street or circuit.

Select Vehicle Above to Narrow Fitment Info!

Year Make Model Trim Engine Vehicle Fit Notes

Lexus

 

IS250

 

ALL

 
4GR-FSE
 
Lexus
IS250
ALL

4GR-FSE
GSE30 Chassis
 

Lexus

 

IS350

 

ALL

 
2GR-FSE
 
Lexus
IS350
ALL

2GR-FSE
GSE31 Chassis