MOROSO 38772 Ultimate-Duty Balancer Bolt Kit

MOROSO
MOROSO 38772 Ultimate-Duty Balancer Bolt Kit

Please Note: Some images my not represent the actual product

Part Number: 38772
Manufacturer: MOROSO
On Sale: $27.84

Availability:
2 New In Stock
Norton Shopping Guarantee
   
 

Product Note:

Ultimate-Duty Balancer Bolt Kit

Specs:

Size: 7/16" -20 threads

DECK PLUG KIT

  • Upper cylinder wall distortion is greatly reduced when these 3/4 NPT plugs are installed in the water passage holes in the decks of Small Block and 90° V6 Chevy engines
  • Water holes must be tapped before the plugs are screwed in; block must also be decked after installation
  • Plugs also restrict water flow to the cylinder heads by reducing size of water passage holes to 5/16
  • Packaged six to a kit

ALUMINUM PIPE PLUGS

  • Use on most aftermarket aluminum blocks and heads to replace plugs removed or damaged during machining, cleaning, etc.
  • Available in two sizes, each with 3/8 hex socket drive for ease of installation and removal
  • Two per package

CHROME PLATED PIPE PLUGS

  • Chrome plated steel pipe plugs dress up often forgotten areas
  • Available for several NPT sizes
  • Use to plug vacuum accessory holes in manifolds, fill plug holes in transmissions and rear ends, or any other spot that accepts a pipe plug

OFFSET CYLINDER HEAD DOWELS

  • Offset cylinder head dowels reposition the cylinder heads upwards on the block (toward the lifter valley), moving valves away from cylinder wall for improved intake flow
  • One package contains 4 alloy steel dowels

EXTRA LONG BELLHOUSING DOWEL PINS

  • Provides an easy method of properly aligning the transmission input shaft to the crankshaft pilot bearing
  • Extra long to simplify the task of installing a bellhousing on the engine block
  • Offset Dowel Pins include set screws and instructions for locking pins into place; drilling and tapping of block required
  • Getting alignment concentric to within ±.005 insures a clean clutch release,maximum pilot bearing and transmission life and reduced shifting problems
  • .625 diameter
  • Two per package
  • Fits virtually all GMV8 and V6 blocks

BELLHOUSING PIN/SLEEVE KITS

  • Allows easy engine removal and realignment during installation

CHROME MOLY HEAD BOLT WASHERS

  • Not your ordinary hardware store variety!
  • Moroso Head BoltWashers are designed for the racer; machined from tough 4130 chrome moly steel, heat treated to proper hardness and parallel-ground
  • Stress loads are more evenly distributed and torque readings more accurate
  • Can also be used on main bearing caps, rocker arm stands, and other engine components
  • Use them over and over again

REAR SEAL ADAPTERS

  • Converts one-piece rear main seal on 1986 and newer Small Block Chevy blocks to the old style, two-piece rear seal when installing the old style crankshaft in the newer style blocks
  • Available for use with both new style oil pan (1986 and newer blocks with one-piece rear seal), and old style oil pan (pre-1980 blocks with driver-side dipstick)
  • Manufactured from billet aluminum
  • Includes fasteners

OIL PUMP STUD KIT

  • Studs are stronger and better at maintaining torque than factory bolts
  • Provides secure mounting for Moroso oil pumps or stock pumps
  • Kit includes flat washer and hex nut and serrated nut for windage tray

BULLET NOSE CARBURETOR STUD KITS

  • Bullet Nose studs are rounded on one end,making it easy to start nuts
  • Kits include 4 studs, hardened flat washers and jam nuts

OIL PAN STUD KITS

  • These stud kits make pan installation easy and prolong gasket life
  • Lock nuts feature attached washers with serrated faces to provide a positive grip on the pan rail
  • Studs are made of heat treated Grade 8 steel with black oxide finish; nuts are cadmium and zinc-plated
  • Highly recommended for use with our fabricated pans

BULLET NOSE OIL PAN STUD KITS

  • Bullet Nose Studs are rounded on one end for easier starting of oil pan mounting nuts
  • Kits include heat treated Grade 8 steel studs with a black oxide finish, and special-design nuts

SELF-LOCKING OIL PAN BOLTS

  • Self-Locking Oil Pan Bolts manufactured from Grade 8 steel
  • Integral serrated washer face provides self-locking effect
  • Cadmium-plated

LIGHTWEIGHT ALUMINUM HOOD PIN SET

  • Set consists of two 3/8 diameter pins with all necessary mounting hardware
  • Pins are manufactured from high strength aluminum alloy
  • We recommend 6 to 8 per hood

QUICK RELEASE HOOD PIN SET

  • A quick, self-contained hood clamping device
  • No pins or lanyards to lose or cause hood damage
  • We recommend 6 to 8 to a hood
  • 3/8 diameter aluminum pins; easy bolt-on installation may be used for many other applications where quick access to a trouble spot is absolutely essential
  • Two per set

OVAL TRACK HOOD PIN SETS

  • Compact and lightweight Hood Pin Sets consist of 3/8 dia. chrome plated steel pins with clips, 1-1/2 dia. stainless steel scuff plates and vinyl-coated stainless steel lanyards
  • Available in 3 and 4 pin lengths
  • Ideal for any full-bodied race cars
  • Two per set

CHROME HOOD PIN SET

  • Hood Pin Sets consist of two chrome plated steel hood pins (5 long with 3 of thread), two 1/8 hitch pins, four cadmium-plated mounting nuts, two scuff plates, two 12 vinyl-coated stainless steel lanyards and two rivet eyelets

QUICK FASTENERS, STEEL

  • Cadmium-plated steel fasteners provide quick fastening of body panels, door, tilt front ends, fiberglass to metal,metal to metal, etc.
  • Available in four lengths and three head styles
  • Use with Spring Nos. 71400, 71410, 71420, 71425 or 71430
  • Ten per package

QUICK FASTENERS, ALUMINUM

  • Thicker body to handle heavy duty jobs and aluminum for light weight
  • Slot head style
  • Use with Spring Nos. 71400, 71410, 71420, 71425 or 71430
  • Ten per package

SELF-EJECTING FASTENERS, 5/16

  • These spring loaded buttons guarantee a quick release
  • The spring holds the button captive so that it cant be dropped underneath the car or into some hard-to-get-at area of the chassis
  • A necessity for quick pit work in both drag racing and oval track
  • Use Spring No. 71430 as a replacement
  • Ten per package

BUTTERFLY SELF-EJECTING FASTENERS, 5/16

  • These fasteners eliminate the need for tools
  • Same as Self-Ejecting Fasteners above, except with thumbscrew on top
  • Use Spring No. 71430 as a replacement
  • Ten per package

LARGE HEAD SELF-EJECTING FASTENERS

  • 7/16 for heavy duty use allows panels to be easily removed with fastener tool, allen wrench or a ratchet without stripping
  • These number 6 fasteners are in demand by racings finest chassis builders
  • Used on steel, aluminum and fiberglass body and interior panels where a more evenly distributed load to avoid pull-through is needed
  • Use with Spring Nos. 71400, 71410, 71420, 71425 or 71430
  • Ten per package

Select Vehicle Above to Narrow Fitment Info!


Year Make Model Trim Engine Vehicle

Chevrolet

 

262 Small Block

 

ALL

 
ALL
 
Chevrolet
262 Small Block
ALL

ALL

Chevrolet

 

265 Small Block

 

ALL

 
ALL
 
Chevrolet
265 Small Block
ALL

ALL

Chevrolet

 

267 Small Block

 

BASE

 
4.4L V8 NA GAS
 
Chevrolet
267 Small Block
BASE

4.4L V8 NA GAS

Chevrolet

 

283 Small Block

 

ALL

 
ALL
 
Chevrolet
283 Small Block
ALL

ALL

Chevrolet

 

302 Small Block

 

ALL

 
ALL
 
Chevrolet
302 Small Block
ALL

ALL

Chevrolet

 

305 Small Block

 

ALL

 
ALL
 
Chevrolet
305 Small Block
ALL

ALL

Chevrolet

 

307 Small Block

 

ALL

 
ALL
 
Chevrolet
307 Small Block
ALL

ALL

Chevrolet

 

327 Small Block

 

ALL

 
ALL
 
Chevrolet
327 Small Block
ALL

ALL

Chevrolet

 

350 Small Block

 

GENERATION I

 
ALL
 
Chevrolet
350 Small Block
GENERATION I

ALL

Chevrolet

 

350 Small Block

 

LATE MODEL

 
ALL
 
Chevrolet
350 Small Block
LATE MODEL

ALL

Chevrolet

 

360 Small Block

 

ALL

 
FI
 
Chevrolet
360 Small Block
ALL

FI

Chevrolet

 

400 Small Block

 

ALL

 
ALL
 
Chevrolet
400 Small Block
ALL

ALL