Product Note:
Roller Pilot Bearing For Chevy V8 Apps
TRANSMISSION PANS
- Fully Fabricated, Aluminum Pans
- One-piece Billet Rail
- Reduce temperature and improve oil control
- Dual fittings with magnetic drain plugs
- Now includes serrated flange hex bolts (No. 42050 includes metric studs)
AUTOMATIC TRANSMISSION OIL COOLER/FILTER
- Combination cooler/filters use “heat sink design” to dissipate the excessive heat build up in racing transmissions
- Can be used on the street as an auxiliary cooler in conjunction with a stock cooler
- Made of aluminum with 500 sq. inches of radiation surface for high heat transfer
- Filter with magnet removes all wear particles over 5 microns in size
- Dimensions: 3” diameter, 12” length, and weighs only 1 lb.
- Very easy to install
- Comes complete with filter cartridge, includes two 1/4” NPT to 3/8” line fittings and all necessary installation instructions
AUTOMATIC TRANSMISSION OIL COOLER/FILTER
- Heavy Duty
- More than double the surface area of our standard No. 41200 transmission cooler
- Withstands up to 30 lbs. of pressure
- Dual combination cooler/filters use “heat sink design” to dissipate the excessive heat build up in racing transmissions
- Made of aluminum with 1072 sq. inches of radiation surface for high heat transfer
- Filter with magnet removes all wear particles over 10 microns in size
- Dimensions: 3-1/2” H x 6-1/4”W x 18” L and weighs 4.7 lbs.
- Very easy to install, uses four mounting tabs; not recommended for street use
- Comes complete with filter cartridge, includes two 1/4” NPT to -6AN fittings and all necessary installation instructions
AUTOMATIC TRANSMISSION EXPANSION TANK
- Universal Fit
- Prevents fluid mist from spraying on the race surface, behind your car (and tires)
- Pressurized fluid is captured in the Expansion tank and will drain back into the transmission as it cools (if mounted as instructed)
- Excess fluid may also be drained between rounds, by using the ball valve included
- Includes tank mounting bracket
- Meets IHRA Top Sportsman and Top Dragster requirement for One Pint Transmission Overflow Rule
- Dimensions: 9-1/4” high x 2-1/4” wide
ROLLER PILOT BEARING
- Unlike other roller pilot bearings, this high speed bearing is designed as a direct replacement in all Chevrolet V8’s and 90° V6’s (also fits 1976 and later V6 Buick)
- Requires no modification to either crank or input shafts
- Eliminates premature bearing failure and insures clean clutch release by maintaining true alignment of clutch disc to flywheel
- Packed with high temperature grease for proper lubrication under extreme high heat conditions
- Suitable for all high performance applications including drag, oval track/road race and street
- 1.093” O.D. x .591” I.D. x .72” Depth
- One per package
TRANSMISSION TAILSHAFT PLUG
- Another time saver from Moroso
- Eliminates the messy spilling of transmission fluid during transmission removal, replacement and storage
- One per package
Still looking for other Aftermarket Performance Parts? Browse our full catalog of Top Aftermarkert Cart Parts & Accessories Brands and Manufacturers here.