Your audio system is only as good as its wiring. Often we go all out for the system itself, but fail to realize we should be doing the same for the wiring components as well. These wires are responsible for transmitting the signals and providing connections for speakers, subwoofers, and power supply. A new stereo should be wired to the existing harness to correspond to the harness socket that leads to your speakers, power sources, and other components. When attempting to reuse old harness systems, they may be damaged, old or not compatible with your new set up. While you have everything out, use this time to upgrade and do it right the first time! If you are looking for reliable wire harness, sportcompactwarehouse.com is the way to go.

For ease of installation, get wire harness designed specifically for your vehicle's make and model, which will allow you to integrate the new audio seamlessly into your dash. This will prevent you from having to cut any wires inside your dash. So, if you need trustworthy wire harness, SCW has you covered with a quality product that will help you install new audio equipment without a hitch. Via the wiring harnesses we offer, you'll also be able to add AUX input to OE or aftermarket stereo.

Read More

Manufacturer 
Display
Per Page
  • «
  • 1
  • »
,
PAINLESS 60505
Please Note:

Some images might not represent the actual product

PAINLESS 60505 Fuel Injection Harnesses Extended Length
for 1996 Chevrolet Corvette ALL

$883.34

Save: $115.22
Sale Price:

$768.12

Estimated Ship Date: Today

Free DelieveryFree Ground Shipping
In Stock - 2 New In Stock
EngineFit NotesFitment Notes
1996 Chevrolet Corvette ALL equipped with
5.7L V8
 
Stock EFI System: Yes
EFI System Manufacturer: Stock
The 1992-93 components may be used on the 1994-97 engines when not using the 4L60E transmission. The PCM programming should match the engine/trans combination and may require modification to turn off the "check engine" light. When using the 94-95 harness: The 1992-93 components may be used on the 1994-97 engines when not using the 4L60E transmission. The PCM programming should match the engine/trans combination and may require modification to turn off the "check engine" light. When using the 94-95 harness
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Stock EFI System: Yes
EFI System Manufacturer: Stock
The 1992-93 components may be used on the 1994-97 engines when not using the 4L60E transmission. The PCM programming should match the engine/trans combination and may require modification to turn off the "check engine" light. When using the 94-95 harness: The 1992-93 components may be used on the 1994-97 engines when not using the 4L60E transmission. The PCM programming should match the engine/trans combination and may require modification to turn off the "check engine" light. When using the 94-95 harness
1996 Chevrolet Corvette ALL equipped with
5.7L V8
 
Stock EFI System: Yes
EFI System Manufacturer: Stock
The 1992-93 components may be used on the 1994-97 engines when not using the 4L60E transmission. The PCM programming should match the engine/trans combination and may require modification to turn off the "check engine" light. When using the 94-95 harness: The 1992-93 components may be used on the 1994-97 engines when not using the 4L60E transmission. The PCM programming should match the engine/trans combination and may require modification to turn off the "check engine" light. When using the 94-95 harness
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Stock EFI System: Yes
EFI System Manufacturer: Stock
The 1992-93 components may be used on the 1994-97 engines when not using the 4L60E transmission. The PCM programming should match the engine/trans combination and may require modification to turn off the "check engine" light. When using the 94-95 harness: The 1992-93 components may be used on the 1994-97 engines when not using the 4L60E transmission. The PCM programming should match the engine/trans combination and may require modification to turn off the "check engine" light. When using the 94-95 harness
1996 Chevrolet Corvette ALL equipped with
5.7L V8
 
Stock EFI System: Yes
EFI System Manufacturer: Stock
The 1992-93 components may be used on the 1994-97 engines when not using the 4L60E transmission. The PCM programming should match the engine/trans combination and may require modification to turn off the "check engine" light. When using the 94-95 harness: The 1992-93 components may be used on the 1994-97 engines when not using the 4L60E transmission. The PCM programming should match the engine/trans combination and may require modification to turn off the "check engine" light. When using the 94-95 harness
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Stock EFI System: Yes
EFI System Manufacturer: Stock
The 1992-93 components may be used on the 1994-97 engines when not using the 4L60E transmission. The PCM programming should match the engine/trans combination and may require modification to turn off the "check engine" light. When using the 94-95 harness: The 1992-93 components may be used on the 1994-97 engines when not using the 4L60E transmission. The PCM programming should match the engine/trans combination and may require modification to turn off the "check engine" light. When using the 94-95 harness
,
ACL 8B663H-20
Please Note:

Some images might not represent the actual product

ACL 8B663H-20 Rod Bearing Set
for 1996 Chevrolet Corvette ALL

$77.59

Save: $10.12
Sale Price:

$67.47

Estimated Ship Date: Today

In Stock - 5 New In Stock
EngineFit NotesFitment Notes
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV
 
{}
Convertible 2-Door
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV {}
Convertible 2-Door
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV
 
{}
Convertible 2-Door
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV {}
Convertible 2-Door
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV
 
{}
Convertible 2-Door
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV {}
Convertible 2-Door
,
MSD 8877
Please Note:

Some images might not represent the actual product

MSD 8877 Ignition Wiring Harness Plug-InTo GM 1996-On Single Connector Coil
for 1996 Chevrolet Corvette ALL

$75.70

Save: $9.87
Sale Price:

$65.83

Estimated Ship Date: Today

In Stock - 5 New In Stock
EngineFit NotesFitment Notes
1996 Chevrolet Corvette ALL equipped with
5.7L V8
 
Engine Wiring Harness
Plug-In
MSD To GM 1996-On Single Connector Coil
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Engine Wiring Harness
Plug-In
MSD To GM 1996-On Single Connector Coil
,
DURA-BOND GMP-55
Please Note:

Some images might not represent the actual product

Dura-Bond GMP-55 HP Camshaft Bearing Set for Chevy Bowtie Block
for 1996 Chevrolet Corvette ALL

$79.93

Save: $10.43
Sale Price:

$69.50

Estimated Ship Date: Today

In Stock - 6 New In Stock
EngineFit NotesFitment Notes
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV
 
EngineVINName: P. P Engine VIN Character
Convertible 2-Door
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV EngineVINName: P. P Engine VIN Character
Convertible 2-Door
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV
 
EngineVINName: P. P Engine VIN Character
Convertible 2-Door
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV EngineVINName: P. P Engine VIN Character
Convertible 2-Door
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV
 
EngineVINName: P. P Engine VIN Character
Convertible 2-Door
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV EngineVINName: P. P Engine VIN Character
Convertible 2-Door
,
PAINLESS 64024
Please Note:

Some images might not represent the actual product

PAINLESS 64024 VATS Anti-Theft Bypass
for 1996 Chevrolet Corvette ALL

$60.94

Save: $7.95
Sale Price:

$52.99

Estimated Ship Date: Today

In Stock - 6 New In Stock
EngineFit NotesFitment Notes
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV
 
Convertible 2-Door
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV Convertible 2-Door
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV
 
Convertible 2-Door
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV Convertible 2-Door
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV
 
Convertible 2-Door
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV Convertible 2-Door
,
SEALED POWER 1235M
Please Note:

Some images might not represent the actual product

Sealed Power 1235M Cam Bearing
for 1996 Chevrolet Corvette ALL

$28.18

Save: $3.68
Sale Price:

$24.50

Estimated Ship Date: Today

In Stock - 86 New In Stock
EngineFit NotesFitment Notes
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV
 
[Engine Camshaft Bearing Set] Standard Size
Babbitt material
Full round design
Quantity needed per vehicle: 1
Convertible 2-Door
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV [Engine Camshaft Bearing Set] Standard Size
Babbitt material
Full round design
Quantity needed per vehicle: 1
Convertible 2-Door
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV
 
[Engine Camshaft Bearing Set] Standard Size
Babbitt material
Full round design
Quantity needed per vehicle: 1
Convertible 2-Door
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV [Engine Camshaft Bearing Set] Standard Size
Babbitt material
Full round design
Quantity needed per vehicle: 1
Convertible 2-Door
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV
 
[Engine Camshaft Bearing Set] Standard Size
Babbitt material
Full round design
Quantity needed per vehicle: 1
Convertible 2-Door
 
1996 Chevrolet Corvette ALL equipped with
5.7L V8 Gas OHV [Engine Camshaft Bearing Set] Standard Size
Babbitt material
Full round design
Quantity needed per vehicle: 1
Convertible 2-Door