Wheel Spacers

We’d be happy to set you up with a wheel & tire package that’s perfect for your 2010 Mazda 3, one that puts the most rubber on the road for optimal traction and handling, delivers an awesome appearance and perfect tire-to-fender gap and stance that makes you look over your shoulder when walking away from your ride, doesn’t hit the frame or suspension and gives you the clearance needed for a big brake kit. But if budget constraints means you have to roll with what you have - wheels that may not have the ideal offset or the right bolt pattern, we have the spacers or adapters that can make them work.

Wheel spacers position the wheels further away from the hubs. Doing this can give you the clearance you need to run a wheel & tire combo that would otherwise rub on the frame or springs, and/or give you the clearance you need to install the larger diameter brake rotors and aftermarket calipers that come in a performance brake kit. Spacers can also push the tires outward so they’re flush with the fenders for the ideal stance, and to widen the track, which increases stability for better handling. Adapters both space the wheels out and allow wheels with a different bolt pattern to be mounted.

We offer a large selection of spacers in a range of widths and in all common bolt patterns, so you can get the ones that will position your wheels exactly where you want them. Thin spacers of 8mm or less may be able to be used with the standard length studs or bolts if enough thread is available for safe wheel fitment. A thicker brake rotor in a big brake kit and wheel thickness are other variables that must be considered. Some kits may include longer bolts or studs, or the length that must be used for safe wheel installation may be specified, so you can measure and decide. Thicker spacers generally push the wheels too far out to enable use of the stock studs/bolts, and these usually come with studs installed or include longer bolts according to application.

Read More

Manufacturer 
Display
Per Page
  • «
  • 1
  • »
,
EIBACH S90-4-25-016
Please Note:

Some images might not represent the actual product

EIBACH S90-4-25-016 Pro Spacer System 4
for 2010 Mazda 3 ALL

$223.10

Save: $29.10
Sale Price:

$194.00

Estimated Ship Date: Today

Free DelieveryFree Ground Shipping
In Stock - 4 New In Stock
EngineFit NotesFitment Notes
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC
 
When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
2010 Mazda 3 ALL equipped with
2.5L l4 Gas DOHC
 
When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.5L l4 Gas DOHC When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC
 
When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC
 
When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Sedan 4-Door
 
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Sedan 4-Door
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC
 
When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Sedan 4-Door
 
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Sedan 4-Door
2010 Mazda 3 ALL equipped with
2.3L l4 Gas DOHC Turbo
 
When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.3L l4 Gas DOHC Turbo When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
2010 Mazda 3 ALL equipped with
2.5L l4 Gas DOHC
 
When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.5L l4 Gas DOHC When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
,
H&R 40655671
Please Note:

Some images might not represent the actual product

H&R 40655671 TRAK+ Wheel Adapter Adapts Audi/VW wheels (5/112 - 57.1 CB) Sold as Pair
for 2010 Mazda 3 ALL

$220.56

Save: $28.77
Sale Price:

$191.79

Estimated Ship Date: Today

Free DelieveryFree Ground Shipping
In Stock - 3 New In Stock
EngineFit NotesFitment Notes
2010 Mazda 3 ALL equipped with
L
 
Wheel Adapter
Adapts Audi/VW wheels (5/112-57.1CB) to fit (5/114.3-67.1CB-12x1.5) hub
 
2010 Mazda 3 ALL equipped with
L Wheel Adapter
Adapts Audi/VW wheels (5/112-57.1CB) to fit (5/114.3-67.1CB-12x1.5) hub
,
H&R 6065671
Please Note:

Some images might not represent the actual product

H&R 6065671 TRAK+ Wheel Spacer DRM Style Sold as Pair
for 2010 Mazda 3 ALL

$220.56

Save: $28.77
Sale Price:

$191.79

Estimated Ship Date: Today

Free DelieveryFree Ground Shipping
In Stock - 4 New In Stock
EngineFit NotesFitment Notes
2010 Mazda 3 ALL equipped with
L
 
Wheel Spacer Kit
 
2010 Mazda 3 ALL equipped with
L Wheel Spacer Kit
,
EIBACH S90-4-15-002
Please Note:

Some images might not represent the actual product

EIBACH S90-4-15-002 Pro Spacer System 4
for 2010 Mazda 3 ALL

$198.95

Save: $25.95
Sale Price:

$173.00

Estimated Ship Date: Today

Free DelieveryFree Ground Shipping
In Stock - 14 New In Stock
EngineFit NotesFitment Notes
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC
 
When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
2010 Mazda 3 ALL equipped with
2.5L l4 Gas DOHC
 
When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.5L l4 Gas DOHC When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC
 
When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC
 
When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Sedan 4-Door
 
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Sedan 4-Door
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC
 
When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Sedan 4-Door
 
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Sedan 4-Door
2010 Mazda 3 ALL equipped with
2.3L l4 Gas DOHC Turbo
 
When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.3L l4 Gas DOHC Turbo When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
2010 Mazda 3 ALL equipped with
2.5L l4 Gas DOHC
 
When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.5L l4 Gas DOHC When using 15mm wheelspacers there must be at least 14mm minimum cut-outs in the wheel to take up the original bolts
(when using 20mm spacers
9mm minimum cut-out
when using 25mm spacers 4mm minimum cut-outs). If this isn&apos
t the case
shorter bolts must be used. (System 5
6). Otherwise the use of this spacers is not possible. | Do not use with vehicles equipped with steel wheels!
Hatchback 4-Door
,
H&R 50695671
Please Note:

Some images might not represent the actual product

H&R 50695671 TRAK+ Wheel Adapter Adapts Porsche wheels (5/130 - 71.6 CB) Sold as Pair
for 2010 Mazda 3 ALL

$182.13

Save: $23.76
Sale Price:

$158.37

Estimated Ship Date: Today

Free DelieveryFree Ground Shipping
In Stock - 1 New In Stock
EngineFit NotesFitment Notes
2010 Mazda 3 ALL equipped with
L
 
Wheel Adapter
Adapts Porsche wheels (5/130-71.6CB) to fit (5/114.3-67.1CB-12x1.5) hub
 
2010 Mazda 3 ALL equipped with
L Wheel Adapter
Adapts Porsche wheels (5/130-71.6CB) to fit (5/114.3-67.1CB-12x1.5) hub
,
TRANS-DAPT 3608
Please Note:

Some images might not represent the actual product

TRANS-DAPT 3608
for 2010 Mazda 3 ALL

$162.79

Save: $21.23
Sale Price:

$141.56

Estimated Ship Date: Today

In Stock - 3 New In Stock
EngineFit NotesFitment Notes
2010 Mazda 3 ALL equipped with
2.3L l4 Gas DOHC Turbo
 
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.3L l4 Gas DOHC Turbo Hatchback 4-Door
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC
 
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC Hatchback 4-Door
2010 Mazda 3 ALL equipped with
2.5L l4 Gas DOHC
 
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.5L l4 Gas DOHC Hatchback 4-Door
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC
 
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC Hatchback 4-Door
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC
 
Sedan 4-Door
 
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC Sedan 4-Door
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC
 
Sedan 4-Door
 
2010 Mazda 3 ALL equipped with
2.0L l4 Gas DOHC Sedan 4-Door
2010 Mazda 3 ALL equipped with
2.3L l4 Gas DOHC Turbo
 
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.3L l4 Gas DOHC Turbo Hatchback 4-Door
2010 Mazda 3 ALL equipped with
2.5L l4 Gas DOHC
 
Hatchback 4-Door
 
2010 Mazda 3 ALL equipped with
2.5L l4 Gas DOHC Hatchback 4-Door
,
ISC Suspension WSMM15B
Please Note:

Some images might not represent the actual product

ISC Suspension WSMM15B Wheel Spacer Sold In Pair
for 2010 Mazda 3 ALL

$155.25

Save: $20.25
Sale Price:

$135.00

Estimated Ship Date: Today

In Stock - 3 New In Stock
EngineFit NotesFitment Notes
2010 Mazda 3 ALL equipped with
ALL
 
Submodel: MAZDASPEED
 
2010 Mazda 3 ALL equipped with
ALL Submodel: MAZDASPEED
,
H&R 4065671
Please Note:

Some images might not represent the actual product

H&R 4065671 TRAK+ Wheel Spacer DRM Style Sold as Pair
for 2010 Mazda 3 ALL

$154.03

Save: $20.09
Sale Price:

$133.94

Estimated Ship Date: Today

In Stock - 6 New In Stock
EngineFit NotesFitment Notes
2010 Mazda 3 ALL equipped with
L
 
Wheel Spacer Kit
8
 
2010 Mazda 3 ALL equipped with
L Wheel Spacer Kit
8
,
H&R 5065671
Please Note:

Some images might not represent the actual product

H&R 5065671 TRAK+ Wheel Spacer DRM Style Sold as Pair
for 2010 Mazda 3 ALL

$154.03

Save: $20.09
Sale Price:

$133.94

Estimated Ship Date: Today

In Stock - 9 New In Stock
EngineFit NotesFitment Notes
2010 Mazda 3 ALL equipped with
L
 
Wheel Spacer Kit
8
 
2010 Mazda 3 ALL equipped with
L Wheel Spacer Kit
8
,
H&R 3065672
Please Note:

Some images might not represent the actual product

H&R 3065672 TRAK+ Wheel Spacer DRM Style Sold as Pair
for 2010 Mazda 3 ALL

$144.52

Save: $18.85
Sale Price:

$125.67

Estimated Ship Date: Today

In Stock - 1 New In Stock
EngineFit NotesFitment Notes
2010 Mazda 3 ALL equipped with
L
 
Wheel Spacer Kit
8
 
2010 Mazda 3 ALL equipped with
L Wheel Spacer Kit
8
,
H&R 30656710
Please Note:

Some images might not represent the actual product

H&R 30656710 TRAK+ Wheel Spacer DRS Style Sold as Pair
for 2010 Mazda 3 ALL

$116.02

Save: $15.13
Sale Price:

$100.89

Estimated Ship Date: Today

In Stock - 2 New In Stock
EngineFit NotesFitment Notes
2010 Mazda 3 ALL equipped with
L
 
Wheel Spacer Kit
 
2010 Mazda 3 ALL equipped with
L Wheel Spacer Kit