QA1 52602 Upper Control Arm - Sport Compact Warehouse

Please Note: Some images might not represent the actual product

QA1

QA1 52602 Upper Control Arm

Part Number: 52602
Manufacturer: QA1
Description : Upper Control ArmQA1 offers a variety of upper and lower control arms for Mustangs, Camaros, GM A-Bo

More...

Authorized Dealer Free Shipping Great Customer Service

Sale Price: $800.51

  • Estimated Ship Date: Today
Free Delievery Free Ground Shipping
In Stock - 3 New In Stock

Description

Product Note:

Upper Control Arm

QA1 offers a variety of upper and lower control arms for Mustangs, Camaros, GM A-Bodies and MOPARs. QA1’s Tubular Control Arms reduce unsprung weight while improving weight distribution in race applications.

Mustang Tubular Control Arms

Eco-Comp Control Arms
The Eco-Comp Control Arms are an economical choice in tubular arms for use on the strip. They are built with QA1’s exclusive compressed rubber bushings and engineered for performance. The Eco-Comps offer value without sacrificing performance.

Pro-Comp Control Arms
The QA1 Pro-Comp Control Arms are the ultimate in adjustability, design and strength. These arms utilized QA1’s exclusive XM series rod ends. These chromoly, heat-treated rod ends use QA1’s exclusive Nylon/PTFE lining for superior performance and durability, Included in the control arm kit are spacers to allow movement of the arms forward and rearward for the wheel base adjustment.

QA1 tubular control arms require the use of QA1 coil-over struts and QA1 caster/camber plates.

Each kit comes with 1 left control arm and 1 right control arm.

Control Arms for Mopar A-Body, B-Body & E-Body

Stronger than the factory control arms without adding any weight!

Upper Control Arms
Ready to bolt on control arm sets for your Mopar. They feature tubular construction, black powder coat and polyurethane inner pivot bushings. These upper control arms increase caster by approximately 3 degrees. Each set comes with ball joints.

Note: Part #52301 is only for factory cars and any A-Body that was swapped to disc brakes with factory parts (large ball joint).

Lower Control Arms
QA1 offers Mopar A, B and E-Body Control Arms with sway bar tabs. These lower control arms are a direct bolt-in on your factory k-member. The set includes bushings, pivot arms and nuts for ease of installation.

Note: Part #52307 is designed to work with the 1964-1966 A-Body with no sway bar and the 1967-1973 A-Body with the 1973-1976 sway bar or “flat bar.”

Part #52308 is designed to work with the E-Body sway bar and the 1970 and up B-Body sway bar.

Control Arms for GM A, G and F-Body

Available for A, G and F-Body vehicles, QA1’s GM control arms are available in race and street configurations making them a great choice for any application. These control arms also feature interchangeable mounts allowing you to use either QA1 coil-over shocks or factory shocks and springs.*

The race arms utilize a QA1 Low Friction Ball Joint and Delrin pivot bushings, providing added performance for drag racing, pro-touring and hard core street applications. The street arms use a factory replacement ball joint and polyurethane pivot bushings, making them great for vehicles used primarily for cruising or long stance events.

GM A, G and F-Body Upper Control Arms
QA1’s A, G and F-Body upper control arms feature powder coated tubular construction for increased strength and great looks. The offset cross shafts allow for easy camber adjustment and adds approximately 2-3 degrees of caster and 0.5-1 degree of negative camber.

GM A, G and F-Body Lower Control Arms
QA1’s A, G and F-Body lower control arms feature powder coated tubular construction for increased strength and great looks. A new sway bar link is also included. The 3rd Generation arms add approximately 1.5 degrees of caster and 1 degree of negative camber adjustment.

*Part number 52312 is only for use with QA1’s Pro Coil Systems, and can not use the interchangeable mount.

Each kit comes with 1 left control arm and 1 right control arm.

QA1 52602 63-87 C10 Control Arm Kit, Upper C10 Control Arm

QA1 upper control arms for 1963-1987 C10s work with the stock springs or with a coil-over conversion. They are made with 12 gauge HSLA steel for increased strength and are powder coated for long-lasting durability, and they feature QA1 performance ball joints and low friction, maintenance-free polymer bushings. These arms add stability with 7 degrees of caster when used with QA1 lower control arms for more stability and driveability. These control arms are sold in pairs and include all necessary hardware. Made in the USA.


Upper control arm for 63-87 C10 trucks.



Still looking for other Aftermarket Performance Parts? Browse our full catalog of Top Aftermarkert Cart Parts & Accessories Brands and Manufacturers here.

Installation Instruction

Click here for printable instructions:

Installation Instructions

Select your vehicle to confirm fitment compatibility with QA1 52602

Year Make Model Trim EngineVehicle Fit Notes

Chevrolet

 

C10

 

ALL

 
L
 
Chevrolet
C10
ALL

L
Suspension Control Arm Kit
 

Chevrolet

 

C10 Pickup

 

ALL

 
L
 
Chevrolet
C10 Pickup
ALL

L
Suspension Control Arm Kit
 

Chevrolet

 

R10

 

ALL

 
L
 
Chevrolet
R10
ALL

L
Suspension Control Arm Kit
 

Chevrolet

 

R10 Suburban

 

ALL

 
L
 
Chevrolet
R10 Suburban
ALL

L
Suspension Control Arm Kit